What's inside a fitness tracker?

What's inside a fitness tracker?

Tracking information such as movement, steps and heart rate are all part of the quantified self movement which is gaining in popularity. The right wearable will be based on your individual needs; whether it’s step counting, sleep tracking or 24/7 heart rate tracking, there’s something for everyone.

Essential reading:Top fitness trackers and health gadgets for 2017

But do you actually know what sensors are hidden inside the Fitbit or Garmin device sitting on your wrist? Read on to find out.


3 axis accelerometer

3 axis accelerometer sensors are fairly common these days and can be found in most activity trackers. They track movement in each direction and can sense the body’s orientation, inclination and tilt as well as take inertial measurements of position and velocity.


Altimeter

An altimeter senses changes in height using atmospheric pressure. The total flights of stairs you have been climbing will be summed up and computed as a factor in the total step count. This makes your calorie output more accurate.


Ambient light sensor

Ambient light sensors detect the time of day. They narrow the light spectrum so that only light forms noticeable to the human eye are identified. That light is converted into a digital signal and then broadcasted to the processor inside the fitness tracker.


Barometer

The barometer tells you whether it is going to be a sunny or rainy day. It measures the pressure exerted by the atmosphere above it. This measurement of pressure can also be used to estimate altitude.


Bioimpedance sensor

Bioimpedance sensors measure the resistance of bio-tissue to a tiny amount of electric current, capturing a wide range of physiological signals. They use two outer electrodes to drive tiny electrical energy and two inner electrodes pick up changes in voltage.

Traditionally, bioimpedance analysis is used in clinical settings to measure your body composition, such as body fat with respect to your lean body mass. Fitness trackers use them for tracking heart rate, sleep, respiration rate, hydration and skin galvanization.


Capacitive sensor

Capacitive Proximity Sensing can be used to wake the device from sleep to light up the user interface. Power consumption is lowered by incorporating a capacitive sensor to only turn the device on when it’s worn.


Gesture technology

It’s a term for technology that’s controlled by different body movements such as waving the wrist or moving your fingers to grab something. Much of the gesture tech is still being developed, but what is to come makes this technology worth keeping track of in the future.


Global Positioning System (GPS)

GPS ensures that all your running stats are accurate. It uses lots of battery and finding a signal can sometimes be hard. However, the results are definitely worth it.


Gyroscope

Gyro sensors, also known as angular rate sensors or angular velocity sensors, are devices that sense angular velocity. They help in movement tracking and improve accuracy when you are on the go. The more axes, the better.


LTE

In all probability, your fitness tracker or smartwatch is dependent on your smartphone for a cellular signal. Unless, that is, you happen to have one that’s Long-Term Evolution (LTE) enabled. LTE is a standard for high-speed wireless communication, based on the GSM/EDGE and UMTS/HSPA technologies. If the smartwatch on your wrist happens to be LTE enabled, that simply means that is has a built-in cellular connection.


Magnetometer

This is a sensor that measures magnetic fields, primarily the magnetic field of the earth. A magnetometer can be used as a compass, to fix your movement to the coordinate system of the earth and pinpoint your exact movements. This is helpful in detecting the orientation of a user in relation to the Earth’s magnetic North.


Optical heart rate monitor

The optical heart rate monitor sits within the fitness tracker and shines a small light against the skin. When your heart pumps, the blood moves through your veins at a quicker rate, causing less light to be reflected back. The wrist worn device will then calculate your heart rate using an algorithm. The current trend may be to move heart-rate monitoring away from the chest and over to the wrist but accuracy at these new locations is still questionable.


Pulse oximeter

Pulse oximeters sensors measure how well oxygen is sent to parts of the body furthest from your heart (such as arms and legs). It involves a light source, usually LEDs, emitting light into the tissue and a photo detector to collect light reflected or transmitted from the skin. Though they became widespread in the 1980s, it is only recently they became more affordable.


Temperature sensor

This sensor monitors temperature changes. It provides a reading of your body temperature.


UV sensor

UV sensors tell the fitness tracker when you might be absorbing dangerous UV radiation and warn you to seek shade if you are likely to burn.


Conclusion

Fitness wearables may have started off no more advanced than a pedometer tracking only movement, but with each passing year they are going further. From motivating you to improve your exercise routine to alerting you of possible illness. In the not too distant future, the sensors will go beyond basic health and fitness functions, to become essential improvement systems that might save lives.

Like this article? Subscribe to our monthly newsletter and never miss out!

Published at Wed, 13 Sep 2017 05:59:50 +0000 from Google News

Ron Kerr

Leave a reply